This category has reproduction exhaust parts for the 1970-1974 Dodge Challenger, from complete T/A systems to the small hangers and brackets that keep everything quiet and in place.

Challenger Exhaust Parts

• T/A systems: 1970 T/A and AAR complete exhaust systems, head pipe sets, left and right mufflers, muffler straps and hangers, and chrome or stainless tip extensions.
• Standard cars: 1970 340 head pipes (not T/A), 1970-74 E-body mufflers and resonators.
• Tips: 2", 2.5" and 3" stainless Challenger exhaust tips and the E-body trunk mounting plate.
• Hangers and shields: 1970-71 exhaust hangers, left side hanger brackets, resonator hangers, tip and muffler hangers and muffler heat shields.

T/A or Standard Challenger?

The 1970 Challenger T/A ran side-exit exhaust in front of the rear wheels, so it uses its own head pipes, mufflers and tips. All other Challengers exit at the rear. Choose tips by the inlet size of your tailpipe, and replace rusted hangers when you install new pipes so the system does not rattle against the floor.

Challenger Exhaust FAQ

Do 'Cuda AAR exhaust parts fit a T/A?

Yes. The 1970 AAR 'Cuda and T/A Challenger share many exhaust parts, and the titles list both.

What tip size do I need?

Measure the outside diameter of your tailpipe and match it to the tip inlet.